Polycom Kirk Wireless Server

Aus STARFACE Wiki

Wechseln zu: Navigation, Suche
Icon-todo.PNG Dieser Artikel ist nicht aktuell oder nicht fertig. Grund: information obsolete, just for reference

Installation

  1. Connect a pc/laptop to the Kirk Wireless Station via network
    • the ip on port eth0 is 192.168.0.1
    • the ip on port eth1 is 192.168.1.1
  2. enter the ip address in your browser (depending on which port you are connected to)
    • Username: admin
    • Password: ip1200 
only eth0 and leave eth1 for debugging
  1. set eth0 to dhcp and reset the wireless server (you can check the ip by connecting to eth1)
  2. goto DECT=>Master in the webinterface
    • set SIP-Proxy to your STARFACE-IP
    • set SIP-Domain to your STARFACE-IP

Configure NTP

    • Enter the information on the Kirk Wireless Server


Configure Handset

    • Turn Handset on
    • Obtain the IPEI of the handset
    • Create a new telephone in the STARFACE Administration
      • Don't set a password for this phone.
    • Create a new user on the Kirk Wireless Server
      • Name and Auth. Name need to be the same.
    • Login form the Handset
Von „http://wiki.starface.de/index.php/Polycom_Kirk_Wireless_Server“
Meine Werkzeuge